I Like Big Buttons! – How To Make A Fabric Cover Button Pendant

Fabric Cover Button Pendants are simple to make and add a stylish twist to any outfit. My oldest and I made some simple Cover Button Pendants for her to share with her dearest friends. We integrated her school colors into the design. We are in love with how they turned out. Can’t wait to hear how her friends react!!!

We carry Pendant Bezel Trays in 23 mm (Size 36) and 38 mm (Size 60). They are available in three finishes: Silver, Antique Brass, and Gunmetal. We chose Size 60 for our project.

First Step:

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

See our pictorial below:

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

*The only addendum to the above instructions was that we cut out small 3/4″ red felt hearts to sandwich between each piece of lace and fabric. You will want to do this before placing the fabric upside down on the tool. Once you press the button cap into place, you can flip our translucent tool over and make sure the heart is placed where you want it.

Step 2:

  1. Carefully apply E6000 to the inside edges of the Pendant Bezel.
  2. Press the assembled Fabric Cover Button into place.
  3. Let dry for the recommended time, add necklace or cord as we did, and enjoy.
  4. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Save

Advertisements

Brand New!!! Pendant Bezel Blanks by I Like Big Buttons!

Yay!!! We are so excited to finally have these. We have gotten a lot of question of the last few years about which size Cover Buttons fit in Pendant Bezel Trays. To answer those questions we went searching and decided to carry our own line of trays that fit our buttons perfectly. At this time, we have 23 mm (Size 36) and 38 mm (Size 60) Pendant Bezels in three finishes: Silver, Antique Brass, and Gunmetal.

7/8″ (23 mm) Round Pendant Bezel Trays

Round Pendant Bezel are perfect for Size 36 cover buttons, tiles, stones, epoxy, photos, glass cabochons, and more.

Measurements:

  • 7/8″ (23 mm) diameter
  • 2/32″ (1.6 mm) depth of tray

Pendant Bezels are frequently combined with:

1 1/2″ (38 mm) Round Pendant Bezel Trays

Round Pendant Bezel are perfect for Size 60 cover buttons, tiles, stones, epoxy, photos, glass cabochons, and more.

Measurements:

  • 1 1/2″ (38 mm) diameter
  • 3/32″ (2 mm) depth of tray

Pendant Bezels are frequently combined with:

There are so many wonderful things you can do with these Pendant Bezels. Happy Crafting!

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

 

Save

Save

Save

Our 5 Most Popular Cover Button Tutorials – I Like Big Buttons!

These aren’t your grandma’s Cover Buttons!!! Well actually they are πŸ˜‰ only better, with so many many great uses for them.

Flat Backs are used for crafts were you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrap booking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, pony tail holders and much, much more.

Here are our 5 most popular Cover Button Tutorials:

#1 – Fabric Cover Button Push Pins

#2 – Fabric Cover Button Badge Reels

#3 – Fabric Cover Button Paper Clip Bookmarks

#4 – Lace and Fabric Cover Button Earrings

#5 – Fabric Cover Button Snap Barrettes

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Save

2017 Back To School Craft Supply Sale at ILikeBigButtons.com !!!

Back to School is upon us!!! As we prepare to send our children for another amazing school year, I wanted to give all of you mamas a mom appropriate Back To School Sale so you can get started with some great crafts or for you pre-planners start thinking about holiday gifts.

Coupon Codes (Good through Friday 8/25/17 on our website):

BTS5 for 5% off of orders over $25

BTS7 for 7% off of orders over $50

BTS10 for 10% off of orders over $100

BTS15 for 15% off of orders over $200

***BONUS: Don’t forget that US orders over $70 also get upgraded to free shipping!!!

Have a great crafty week!!!

I Like Big Buttons! and All Buttons big and small πŸ™‚

KAM Snaps:

IMG_6515

Pacifier Supplies:

All Enamel Clips Angle wide

MAM rings all colors

O ring all colors angle

Cover Buttons:

Key Fob Hardware:

Barrettes:

Bobby Pins:

bobby pins all colors (4x4) tight shot

Paper Clips:

Earring Supplies:

10mm earring (4x4)

Sewing Notions:

Wonderific Clips All Main Shot

And Much More…

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Save

Save

Save

Save

Our 5 Most Popular Pacifier Clip Tutorials – I Like Big Buttons!

Pacifier Clips are easy to make, fun to embellish, and a great useful gift for a new mom and baby. Here are our top 5 Pacifier Clip Tutorials:

#1 – A Cover Button Metal Pacifier Clips with Cover Buttons, Round Faced Metal Suspender Clips, and KAM Snaps

Cover Button Metal Pacifier Clips pic23

#2 – Jean Pacifier Clip with Rosette using KAM Plastic Snaps and Clip

jean-pacifier-clip-with-rosette-kam-clip-22

#3 – “No Sew” Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

No Sew Pacifier Clip with MAM O Ring pic 22

#4 – Fabric Pacifier Clip with KAM Snaps, MAM Ring or O-Ring and an KAM Plastic Pacifier Clip for Button Style Pacifiers

Fabric Pacifier Clip with MAM O Ring pic 23

#5 – Recycling Jeans into a Pacifier Clip using KAM Snaps and a Pacifier Clip

Recycled Jean Paciifer Clip pic 12

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Save

Save

Fabric Cover Buttons @ I Like Big Buttons!

cover-buttons-slide-show-pic_with-words_1

We love our Cover Buttons! Easy to make and versatile they are one of my favorite go to craft supplies.

πŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈ

Take 12% off your Cover Button order over $55 until Wednesday, August 9th with coupon code: BUTTONLOVE

πŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈπŸ’œπŸ’™πŸ’šπŸ’›β€οΈ

Flat Backs are used for crafts were you would like to glue a cover button: jewelry, bracelets, rings, earrings, necklaces, bobby pins and barrettes, scrap booking, and much more.

Wire Backs are used for fabric cover buttons in sewing, shoes, clothing, pony tail holders and much, much more.

Here are the 7 sizes we carry. From 1/2″, which is about as small as your pinky nail, all the way up to 1 7/8″ in diameter, about the size of the round side of a kiwi fruit. We carry them in both flat back (glueable) and wire back (sewable).

Assembling fabric Cover Buttons is fast and simple. In just seconds, you will have a button ready for your latest craft project.

See our pictorial below:

How to Make Fabric Cover Buttons:

Cover Buttons are easy to assemble:

  1. Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank.
  2. Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.
  3. Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.
  4. Press the cover button edges down into the tool.
  5. Place the back cover button piece on top of your fabric and button front. If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.
  6. Take the smaller piece of the assembly tool and with the open side down place it on the button back.
  7. Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again.
  8. When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.
  9. Remove the button from the larger assembly tool piece.
  10. Tada!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

I Like Big Buttons! – How To Make Fabric Cover Button Push Pins

Today I am making Fabric Cover Button Push Pins for my cork boards. I am ‘trying’ to get more organized with my kiddos paperwork, schedules, and notes that I need to keep track of. The cork boards are up, and now I just need some cute embellished Fabric Push Pins to jazz up my organization. πŸ™‚

Supplies:

1.Β  Cut your fabric scrap. You will want a circle that is about twice the diameter of your button blank. *TIP* Our All-In-One Cover Button Template makes creating the right size circle of fabric a breeze.

2.Β  Put your fabric piece in the larger assembly tool piece (RIGHT SIDE DOWN). When you look into the tool you want to see the back of the fabric.

3.Β  Place the button front (the domed piece) on top of the fabric. Leave the fabric edges hanging out.

4.Β  Press the cover button edges down into the tool. *TIP* To make it easier on my fingers, I use a sharpie marker to apply pressure.

5.Β  Place the back cover button piece on top of your fabric and button front. *TIP* If the cover button will be subject to repeated tugging from the back, you may want to add a little e6000 adhesive before attaching the back.

6.Β  Take the smaller piece of the assembly tool and with the open side down place it on the button back.

7.Β  Press down. You may hear a pop when the last bit of the button back slips into place. If you take the tool out and the button is not completely secured, just put it back in and press down again. *TIP* I often use a flat piece of wood to apply pressure, again to save my fingers. It also helps to avoid the button back going in at an angle.

8.Β  When you take the small assembly tool piece off, the fabric edges will be secured underneath the button back.

9.Β  Remove the button from the larger assembly tool piece.

10.Β  Tada! Now to attach it to the Thumb Tack and make a Fabric Cover Button Push Pin.

11.Β  Apply E6000 to back of Cover Button.

12.Β  Center and press Thumb Tack into place and remove any extra Adhesive.

13.Β  Let dry and enjoy. Tada, tada!!! So Cute!!!

To see other great Fabric Cover Button ideas, visit our DIY Project section here.

Β© ILikeBigButtons.com and I Like Big Buttons Blog, 2017.

Save

Save